Easy Steps to Install the VoIP Phone Service

Written by GtoRMan Monday, 31 May 2010 01:59

Voice over Internet Protocol or VoIP is the new development of technology that involves the use of internet for voice communication purpose. This voip phone service is even much more valuable than the traditional home phone system.

If you still use the traditional phone system and you want to turn the choice into the voip phone service, you can start the first step by choosing the VoIP providers that come in varied features and prices. In details, the VoIP service will convert the analog calls to digital through a high speed internet connection.

When you are ready to install the VoIP system, you should disconnect the local phone company wiring from the current home phone system and move the wire box for the incoming phone line and open it. Afterward, you should unplug the short phone wires from the jack. Before you continue the installation, you must ensure that the phone line is dead.

Next, after you are sure all the wires from the box are disconnected, you can continue the viop phone service installation by connecting the cable or DSL modem to the VoIP adapter and plug it into any telephone jack with a regular phone cord. Furthermore, when the adapter is plugged, you will need to hook up your home phones to any remaining telephone jacks in your house.

It is important for you to check or test the phone line by listening to a dial tone. If it is unfortunately you are not able to hear any tone, you will have to check the connection between the modem, adapter, jack, and telephone. After you can hear the dial tone, you can start using your voip phone service.